PMG10 - SSI - Absolutní enkodér Baumer
- Magnetické snímání
- Zobrazení funkcí pomocí LED diod
- Víceotáčkové snímání s technologií sběru energie "MicroGen", bez převodu nebo baterie
- Oboustranný ložiskový systém s hybridními ložisky
- Speciální ochrana proti korozi CX (C5-M)
Chcete znát dostupnost zboží? Vložte produkt do poptávky a my se vám ozveme.
Potřebujete poradit s výběrem nebo najít alternativu? Kontaktujte produktového specialistu.
Poradím vám
Parametry
Elektrické vlastnosti
| Napájecí napětí: | 4.75...30 VDC |
| Odolnost proti zkratu: | Yes |
| Spotřeba: | ≤100 mA (SSI) |
| Čas inicializace: | ≤ 500 ms after power on |
| Rozhraní: | SSI |
| Funkce: | Multiturn |
| Kroků na otáčku: | 1048576 / 20 bit |
| Počet otáček: | 1048576 / 20 bit |
| Další výstupy: | Square-wave TTL/HTL,TTL/RS422 |
| Typ snímání: | Magnetic |
| Typ kódu: | Gray or binary |
| Průběh kódu: | CW (factory setting) |
| Vstupní signály: | SSI clock, PRESET, rotating direction |
| Odolnost proti rušení dle: | EN 61000-6-2 |
| Vyzařované rušení dle: | EN 61000-6-3 |
| Testovací funkce: | Function control |
| Indikátor stavu: | 4 LEDs in device back side |
| Schválení: |
|
Technické údaje - elektrické jmenovité hodnoty (přepínač rychlosti)
| Spínací přesnost: | ± 2 % (or 1 Digit) |
| Spínací výstup: | 1 output (Open collector, solid state relay on request) |
| Výstupní spínací napětí: | 30 VDC; ≤100 mA |
| Čas zpoždění spínání: | ≤20 ms |
Mechanické provedení
| Rozměr (příruby): | ø115 mm |
| Typ hřídele: | ø11 mm solid shaft |
| Příruba: |
|
| Ochrana EN 60529: | IP 66 / IP 67 |
| Provozní rychlost: | ≤12000 rpm |
| Rozsah spínací rychlosti: | ns (off) = ±2...12000 rpm |
| Velikost provozního točivého momentu.: | 10 Ncm |
| Moment setrvačnosti rotoru: | 1 kgcm² |
| Přípustné zatížení hřídele: |
|
| Materiál: |
|
| Ochrana proti korozi: |
|
| Pracovní teplota: | -40...+95 °C |
| Relativní vlhkost: | 95 % non-condensing |
| Odolnost: |
|
| Přibližná hmotnost: | 1.9 kg (depending on version) |
| Připojení: |
|
Nákresy
Výkresy
Ke stažení
Datový list
Manuál
Brožury / Katalogy
Prohlášení o shodě
CAD
- PMG10 SSI, solid shaft ø11 mm with EURO flange B10, 2x terminal box with cable gland M20 (PMG10x-SHx.1MUx.xxxxxx) | stáhnout (zip, 2025-07-11 21:01:37)
Příslušenství
Montážní příslušenství
Další podobné produkty naleznete v kategorii: Pro enkodéry s válcovou hřídelí / Spojky
| Foto | Produkt (1) / Popis | Dostupnost |
|---|---|---|
 | Spring disk coupling K60 WD 11PF4 + 12PF4 Obj. číslo: 11064874
| Na dotaz |
Konektory a kabely
Další podobné produkty naleznete v kategorii: Konektory M23 / kabely, Kabely a konektory / Kabely bez konektorů
| Foto | Produkt (8) / Popis | Skladová dostupnost |
|---|---|---|
 | Mating connector M23 (11 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 10 m Obj. číslo: 11172580 Mating connector M23 (17-pin, 11 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, length 10 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634. | na dotaz |
 | Mating connector M23 (11 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 3 m Obj. číslo: 11172481 Mating connector M23 (17-pin, 11 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, length 3 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634. | na dotaz |
 | Mating connector M23 (11 pins assigned) 17-pin, CCW with sensor cable HEK 17, length 5 m Obj. číslo: 11172499 Mating connector M23 (17-pin, 11 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, length 5 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634. | na dotaz |
 | Mating connector M23 (17 pins assig.) 17-pin, CCW, cable HEK 17, 3 m Obj. číslo: 11172463 Mating connector M23 (17-pin, 17 pins assigned, female, CCW) for cable connection to the flange connector M23 (17-pin, male, CW) with connected sensor cable HEK 17, length 3 m. The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634. | na dotaz |
 | Mating connector M23, solder version, 12-pin, CCW Obj. číslo: 11068577 Mating connector M23 in solder version (12-pin, female, CCW) for cable connection to the flange connector M23 (12-pin, male, CW). | na dotaz |
 | Mating connector M23, solder version, 17-pin, CCW Obj. číslo: 11068551 Mating connector M23 in solder version (17-pin, female , CCW) for cable connection to the flange connector M23 (17-pin, male , CW). | na dotaz |
 | Sensor cable for encoders HEK 17 Obj. číslo: SensorcableforencodersHEK17 The sensor cable HEK 17 is a proven industrial product designed to match high demands. It is halogen free, oil-resistant, abrasion and notch-resistant and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL AWM Style 20236, CSA AWM IA/B; IIA/B FT 1, UL File No. E63634. The cable can be supplied in any length and pre-fitted with various connectors. | na dotaz |
 | Sensor cable for encoders HEK 8 Obj. číslo: SensorcableforencodersHEK8 The sensor cable HEK 8 is a proven industrial product designed to match high demands. It is halogen free and its rugged outer construction allows it to be pulled and dragged in free conditions. It is certified to UL 20233. The cable can be supplied in any length and pre-fitted with various connectors. | na dotaz |
Podpora
Zájem či dotaz na produkt
Podobné produkty
| Foto | Produkt (26) | Rozměr příruby | Kroků za otáčku | Počet otáček | Rozhraní | Skladová dostupnost |
|---|---|---|---|---|---|---|
 | AMG 11 | ø90 - 160 mm | 13 bit | 16 bit | SSI Profibus CANopen® DeviceNet PROFINET | na dotaz |
 | AMG 71 | ø60...90 mm | 13 bit | 12 bit 16 bit | SSI | na dotaz |
 | AMG 81 | ø90 - 160 mm | 13 bit | 12 bit 16 bit | SSI Profibus CANopen® | na dotaz |
 | HMG 11 | ø90 - 160 mm | 13 bit | 16 bit | SSI Profibus CANopen® DeviceNet PROFINET | na dotaz |
 | HMG 161 | ø90 - 160 mm | 13 bit | 16 bit | SSI Profibus CANopen® DeviceNet | na dotaz |
 | HMG10-B - CANopen® | ø90 - 160 mm | 13 bit | 16 bit | CANopen® | na dotaz |
 | HMG10-B - DeviceNet | ø90 - 160 mm | 13 bit | 16 bit | DeviceNet | na dotaz |
 | HMG10-B - EtherCAT | ø90 - 160 mm | 13 bit | 16 bit | EtherCAT | na dotaz |
 | HMG10-B - EtherNet/IP | ø90 - 160 mm | 13 bit | 16 bit | EtherNet/IP | na dotaz |
 | HMG10-B - Profibus DP | ø90 - 160 mm | 13 bit | 16 bit | Profibus | na dotaz |
 | HMG10-B - PROFINET | ø90 - 160 mm | 13 bit | 16 bit | PROFINET | na dotaz |
 | HMG10-B - SSI | ø90 - 160 mm | 20 bit | 20 bit | SSI | na dotaz |
 | HMG10-T - CANopen® | ø90 - 160 mm | 13 bit | 16 bit | CANopen® | na dotaz |
 | HMG10-T - DeviceNet | ø90 - 160 mm | 13 bit | 16 bit | DeviceNet | na dotaz |
 | HMG10-T - EtherCAT | ø90 - 160 mm | 13 bit | 16 bit | EtherCAT | na dotaz |
 | HMG10-T - EtherNet/IP | ø90 - 160 mm | 13 bit | 16 bit | EtherNet/IP | na dotaz |
 | HMG10-T - Profibus DP | ø90 - 160 mm | 13 bit | 16 bit | Profibus | na dotaz |
 | HMG10-T - PROFINET | ø90 - 160 mm | 13 bit | 16 bit | PROFINET | na dotaz |
 | HMG10-T - SSI | ø90 - 160 mm | 20 bit | 20 bit | SSI | na dotaz |
 | PMG10 - CANopen® | ø90 - 160 mm | 13 bit | 16 bit | CANopen® | na dotaz |
 | PMG10 - DeviceNet | ø90 - 160 mm | 13 bit | 16 bit | DeviceNet | na dotaz |
 | PMG10 - EtherCAT | ø90 - 160 mm | 13 bit | 16 bit | EtherCAT | na dotaz |
 | PMG10 - EtherNet/IP | ø90 - 160 mm | 13 bit | 16 bit | EtherNet/IP | na dotaz |
 | PMG10 - Profibus DP | ø90 - 160 mm | 13 bit | 16 bit | Profibus | na dotaz |
 | PMG10 - PROFINET | ø90 - 160 mm | 13 bit | 16 bit | PROFINET | na dotaz |
 | PMG10 - SSI | ø90 - 160 mm | 20 bit | 20 bit | SSI | na dotaz |
Napište nám