| 10109475 - Mounting bracket for sensors Ø 8 mm | Montážní příslušenství
| na dotaz |
| 10113873 - Mounting bracket series 12 (L design) | Montážní příslušenství
| na dotaz |
| 10113917 - Mounting bracket series 16 (L design) | Montážní příslušenství
| na dotaz |
| 10114501 - Mounting bracket series 10 (U design) | Montážní příslušenství
| na dotaz |
| 10114652 - Cutting tool for plastic fiber optics- Delivered with every plastic fiber optic
| Montážní příslušenství
| na dotaz |
| 10116407 - Lens cleaning air nozzle bracket | Montážní příslušenství
| na dotaz |
| 10117742 - Clamping nut for sensors Ø 6,5 mm- Tightening torque max. 0.8 Nm
| Montážní příslušenství
| na dotaz |
| 10118798 - Mounting bracket series 10 | Montážní příslušenství
| na dotaz |
| 10119345 - Clamping nut for sensors Ø 4 mm- Tightening torque max. 0.5 Nm
| Montážní příslušenství
| na dotaz |
| 10119373 - Mounting bracket for fine adjustment series 16 | Montážní příslušenství
| na dotaz |
| 10119909 - Doubling lens M4 increases the actual range (paires)- Material: brass / glass
- Increases the actual range Sb by a factor of 6
- Contents: 2 pieces
| Čočky / apertury / skleněné kryty
| na dotaz |
| 10119911 - Mounting bracket Ø 2,2 mm | Montážní příslušenství
| na dotaz |
| 10119912 - Mounting bracket Ø 1,1 mm | Montážní příslušenství
| na dotaz |
| 10125534 - Mounting bracket for fiber optic sensors series 22- Material: Steel
- Delivered with every plastic fiber optic sensor series 22
| Montážní příslušenství
| na dotaz |
| 10126220 - Mounting bracket series 22 L design | Montážní příslušenství
| na dotaz |
| 10133792 - Mounting bracket series 10 (L design) | Montážní příslušenství
| na dotaz |
| 10134540 - Doubling lens increases the actual range (paires)- Side view version
- Increases the actual range Sb by a factor of 6
- Contents: 2 pieces
| Čočky / apertury / skleněné kryty
| na dotaz |
| 10134541 - Doubling lens increases the actual range (paires)- Increases the actual range Sb by a factor of 6
- Contents: 2 pieces
| Čočky / apertury / skleněné kryty
| na dotaz |
| 10134542 - Focusing lens M3 ø 2 mm- Light spot Ø 2 mm at a distance of 19 mm
| Čočky / apertury / skleněné kryty
| na dotaz |
| 10134543 - Focusing lens M3 ø 0,4 m- Light spot Ø 0,4 mm at a distance of 7 mm
| Čočky / apertury / skleněné kryty
| na dotaz |
| 10134544 - Focusing lens M3 ø 0,1 mm- Light spot Ø 0,1 mm at a distance of 4,6 mm
| Čočky / apertury / skleněné kryty
| na dotaz |
| 10134964 - Mounting bracket series 14 (L design) | Montážní příslušenství
| na dotaz |
| 10137021 - Clamping nut for sensors Ø 3 mm- Tightening torque max. 0.5 Nm
| Montážní příslušenství
| na dotaz |
| 10140260 - Reduction tube- Set of 2
- Delivered with every 1 mm diameter plastic fiber optic
| Čočky / apertury / skleněné kryty
| na dotaz |
| 10143377 - Mounting bracket for sensors Ø 20 mm- Material: Polypropylene (PP)
| Montážní příslušenství
| na dotaz |
| 10144075 - Slot aperture stickers series 14- Material: Polyester foil
- Contents: 2 pieces
- self-adhesive
| Čočky / apertury / skleněné kryty
| na dotaz |
| 10145523 - Fiber optic cable extension 5 m highly flexible- Reduction in range due to fiber optic extension: 5 m = approx. 60%
| Montážní příslušenství
| na dotaz |
| 10145702 - Mounting bracket for fiber optic sensors series 12- Material: Steel
- Delivered with every plastic fiber optic sensor series 12
| Montážní příslušenství
| na dotaz |
| 10150328 - Sensofix series 12- Clamps made of stainless steel
- Ball pivots made of galvanized steel
- Mounting panel made of stainless steel
| Montážní příslušenství
| na dotaz |
| 10151658 - Sensofix series 18- Clamps made of stainless steel
- Ball pivots made of galvanized steel
- Mounting panel made of stainless steel
| Montážní příslušenství
| na dotaz |
| 10151719 - Sensofix series 08 round- Clamps made of stainless steel
- Ball pivots made of galvanized steel
- Mounting panel made of stainless steel
| Montážní příslušenství
| na dotaz |
| 10151721 - Sensofix series 16- Mounting panel made of stainless steel
- Clamps made of stainless steel
- Ball pivots made of galvanized steel
| Montážní příslušenství
| na dotaz |
| 10152385 - Sensofix series 18/20 inductive rectangular- Clamps made of stainless steel
- Ball pivots made of galvanized steel
- Mounting panel made of stainless steel
| Montážní příslušenství
| na dotaz |
| 10152386 - Sensofix series 30- Clamps made of stainless steel
- Ball pivots made of galvanized steel
- Mounting panel made of stainless steel
| Montážní příslušenství
| na dotaz |
| 10156738 - Fiber optic cable extension 2 m- Reduction in range due to fiber optic extension: 2 m = approx. 25%
| Montážní příslušenství
| na dotaz |
| 10156878 - Protector cap OxDM 20- Material: PMMA
- Self-adhesive
| Čočky / apertury / skleněné kryty
| na dotaz |
| 10158142 - Fiber optic cable extension 5 m- Reduction in range due to fiber optic extension: 5 m = approx. 60%
| Montážní příslušenství
| na dotaz |
| 10159806 - Mounting bracket for fiber optic sensors series 60, 66, 67, 80- Material: Steel
- Must be ordered separately for series 66 and series 67sensors
| Montážní příslušenství
| na dotaz |
| 10161695 - Mounting bracket for sensors series 13 (L design) | Montážní příslušenství
| na dotaz |
| 10161829 - Sensofix series 13- Clamps made of stainless steel
- Ball pivots made of galvanized steel
- Mounting panel made of stainless steel
| Montážní příslušenství
| na dotaz |
| 10162083 - Mounting panel for sensors series 10 | Montážní příslušenství
| na dotaz |
| 10163196 - Mounting brad FHDK 04- Material: Nickel-plated steel
| Montážní příslušenství
| na dotaz |
| 11046278 - Mounting bracket series 14 washdown- Material: Stainless Steel
| Montážní příslušenství
| na dotaz |
| 11077517 - Mounting bracket for sensors series 25 (L design) | Montážní příslušenství
| na dotaz |
| 11092246 - Mounting bracket O500/U500 (L design) | Montážní příslušenství
| na dotaz |
| 11102423 - Mounting bracket O300/U300 (L design) | Montážní příslušenství
| na dotaz |
| 11111164 - Mounting bracket O500/U500 - Retrofit for sensors series 30 | Montážní příslušenství
| na dotaz |
| 11124807 - Mounting bracket O300 - Retrofit for sensors series 20 | Montážní příslušenství
| na dotaz |
| 11126836 - Mounting bracket X7 30° horizontal for PosCon and OM70, incl. accessories- Fitting for PosCon and OM70
- Mounting at an angle of 30° horizontal
- Bracket and mounting hardware
| Montážní příslušenství
| na dotaz |
| 11126837 - Mounting bracket X7 30° vertical for PosCon and OM70, incl. accessories- Fitting for PosCon and OM70
- Mounting at an angle of 30° vertical
- Bracket and mounting hardware
| Montážní příslušenství
| na dotaz |
| 11200030 - Sensofix series 30- Clamps made of stainless steel
- Ball pivots made of galvanized steel
- Mounting panel made of stainless steel
| Montážní příslušenství
| na dotaz |
| 11707960 - Mounting bracket 90° for OX100, incl. accessories- Montážní díly pro OX100
- Montáž pod úhlem 90°
- Držák a montážní příslušenství včetně klíče Torx
| Montážní příslušenství
| na dotaz |
| 11707961- Fitting for OX100
- Mounting at an angle of 30° horizontal
- Bracket and mounting hardware
| Montážní příslušenství
| na dotaz |
| 11707962- Fitting for OX100
- Mounting at an angle of 30° vertical
- Bracket and mounting hardware
| Montážní příslušenství
| na dotaz |
| 2x torque arms, 3-armed (mounting kit 020)- 2 torque arms, 3-armed, bolt circle ø76 mm, mounting M3
- For high-dynamic applications.
| | na dotaz |
| Attachment bell KIT- Attachment kit for encoder with synchro flange
- Centering seat Ø70 mm, mounting hole circle Ø77 mm
- Can be used in combination with coupling CPS37 (not included)
| | na dotaz |
| Attachment bell KIT- Attachment kit for encoder with synchro flange
- Centering seat Ø70 mm, mounting hole circle Ø77 mm
- Can be used in combination with coupling CPS37 (not included)
| | na dotaz |
| Bellows coupling (D1=06 / D2=08)- Backlash-free angle-synchronous transmission
- Optimum compensation of misalignments
- Very high torsional spring stiffness
- Small restoring force
- Vibration damping
- Stainless steel bellows
| | na dotaz |
| Bellows coupling (D1=06 / D2=08)- Úhlově synchronní přenos bez vůlí
- Optimální kompenzace nesouososti
- Velmi vysoká torzní tuhost pružiny
- Malá obnovovací síla
- Tlumení vibrací
- Vlnovec z nerezové oceli
| | na dotaz |
| Bellows coupling (D1=10 / D2=12)- Bellows coupling free from backlash, including clamping hub
- High torsional resistance
- Compensation of shaft misalignments at minimized restoring force
| | na dotaz |
| Bellows coupling (D1=10 / D2=12)- Backlash-free angle-synchronous transmission
- Optimum compensation of misalignments
- Very high torsional spring stiffness
- Small restoring force
- Vibration damping
- Stainless steel bellows
| | na dotaz |
| Bellows coupling (D1=10 / D2=12)- Úhlově synchronní přenos bez vůlí
- Optimální kompenzace nesouososti
- Velmi vysoká torzní tuhost pružiny
- Malá obnovovací síla
- Tlumení vibrací
- Vlnovec z nerezové oceli
| | na dotaz |
| Bellows coupling (D1=6 / D2=10)- Bellows coupling free from backlash, including clamping hub
- High torsional resistance
- Compensation of shaft misalignments at minimized restoring force
| | na dotaz |
| Bellows coupling (D1=6 / D2=12)- Bellows coupling free from backlash, including clamping hub
- High torsional resistance
- Compensation of shaft misalignments at minimized restoring force
| | na dotaz |
| BX 20-1200-1 - Velcro strip cut to length 1200 mm- Base material: Polyamide
- Overall thickness: 1,8 to 2,2 mm
- Breaking strength: > 210 N/cm
| Montážní příslušenství
| na dotaz |
| BX 20-2000-1 - Velcro strip cut to length 2000 mm- Base material: Polyamide
- Overall thickness: 1,8 to 2,2 mm
- Breaking strength: > 210 N/cm
| Montážní příslušenství
| na dotaz |
| BX 20-360-1 - Velcro strip cut to length 360 mm- Base material: Polyamide
- Overall thickness: 1,8 to 2,2 mm
- Breaking strength: > 210 N/cm
| Montážní příslušenství
| na dotaz |
| BX 20-4000-1 - Velcro strip cut to length 4000 mm- Base material: Polyamide
- Overall thickness: 1,8 to 2,2 mm
- Breaking strength: > 210 N/cm
| Montážní příslušenství
| na dotaz |
| CAM12.W13-11238690 | | na dotaz |
| CAM12.W13-11238690 | | na dotaz |
| CAM12.W14-11238691 | | na dotaz |
| CAM12.W14-11238691 | | na dotaz |
| CAM12.W18-11238693 | | na dotaz |
| CAM12.W18-11238693 | | na dotaz |
| CAM12.WS13-11238694- Torque wrench set
- M12, AF 13, 0.6 Nm
| | na dotaz |
| CAM12.WS13-11238694- Torque wrench set
- M12, AF 13, 0.6 Nm
| | na dotaz |
| CAM12.WS14-11238692- Torque wrench set
- M12, AF 14, 0.6 Nm
| | na dotaz |
| CAM12.WS14-11238692- Torque wrench set
- M12, AF 14, 0.6 Nm
| | na dotaz |
| CAM12.WS17-11238695 | | na dotaz |
| CAM12.WS18-11238696- Torque wrench set
- M12, AF 18, 0.6 Nm
| | na dotaz |
| CAM12.WS18-11238696- Torque wrench set
- M12, AF 18, 0.6 Nm
| | na dotaz |
| CAM8.W9-11238647 | | na dotaz |
| CAM8.W9-11238647 | | na dotaz |
| CAM8.WS9-11238649- Torque wrench set
- M8, AF 9, 0.4 Nm
| | na dotaz |
| CAM8.WS9-11238649- Torque wrench set
- M8, AF 9, 0.4 Nm
| | na dotaz |
| Clamping ring set 16/30x6 - stainless steel (Z 119.092)- Clamping ring set in stainless steel
| | na dotaz |
| Clamping ring set 28.4/50x12 - stainless steel (Z 119.102)- Clamping ring set in stainless steel
| | na dotaz |
| Cone spreader shaft ø10 mm- Suitable for hollow shaft diameter 14 mm
| | na dotaz |
| Cone spreader shaft ø10 mm V1- Suitable for hollow shaft diameter 14 mm
| | na dotaz |
| Cone spreader shaft ø14 mm- Suitable for hollow shaft diameter 14 mm
| | na dotaz |
| Double loops coupling (D1=05 / D2=06)- Thermally and electrically isolated
- Absorbing shocks and vibration
- Excellent compensation of radial, lateral and angular misalignments
- Medium torsional stiffness
- Low restoring forces
- Maintenance-free
| | na dotaz |
| Double loops coupling (D1=05 / D2=06)- Tepelně a elektricky izolované
- Absorpce nárazů a vibrací
- Vynikající kompenzace radiálních, bočních a úhlových nesouosostí
- Střední torzní tuhost
- Nízká obnovovací síla
- Bezúdržbovost
| | na dotaz |
| Double loops coupling (D1=06 / D2=06)- Thermally and electrically isolated
- Absorbing shocks and vibration
- Excellent compensation of radial, lateral and angular misalignments
- Medium torsional stiffness
- Low restoring forces
- Maintenance-free
| | na dotaz |
| Double loops coupling (D1=06 / D2=06)- Thermally and electrically isolated
- Absorbing shocks and vibration
- Excellent compensation of radial, lateral and angular misalignments
- Medium torsional stiffness
- Low restoring forces
- Maintenance-free
| | na dotaz |
| Double loops coupling (D1=6 / D2=10)- Thermally and electrically isolated
- Absorbing shocks and vibration
- Excellent compensation of radial, lateral and angular misalignments
- Medium torsional stiffness
- Low restoring forces
- Maintenance-free
| | na dotaz |
| Double loops coupling (D1=6 / D2=10)- Thermally and electrically isolated
- Absorbing shocks and vibration
- Excellent compensation of radial, lateral and angular misalignments
- Medium torsional stiffness
- Low restoring forces
- Maintenance-free
| | na dotaz |
| EBS.R-FN032.B022.N0A.P0031/9503- 32 poles on an outside diameter of 30.5 mm
- For cost-efficient bonding
- For 22.1 mm shaft diameter
- Option packaging unit: 36 pieces
| | na dotaz |
| EBS.R-FN032.S008.A14.P0031- 32 poles on an outside diameter of 30.5 mm
- Simple screw mounting
- For 8 mm shaft diameter
| | na dotaz |
| EBS.R-FN032.S010.A14.P0031- 32 poles on an outside diameter of 30.5 mm
- Simple screw mounting
- For 10 mm shaft diameter
| | na dotaz |
| EBS.R-FN032.S012.A14.P0031- 32 pólů na vnějším průměru 30,5 mm
- Jednoduchá montáž pomocí šroubů
- Pro průměr hřídele 12 mm
| | na dotaz |
| EBS.R-FN032.S014.A14.P0031- 32 poles on an outside diameter of 30.5 mm
- Simple screw mounting
- For 14 mm shaft diameter
| | na dotaz |
| EBS.R-FN064.B048.N08.P0056- 64 poles on an outside diameter of 56 mm
- For cost-efficient bonding
- For 47.9 mm shaft diameter
| | na dotaz |
| EBS.R-FN064.B048.N08.P0056/9502- 64 poles on an outside diameter of 56 mm
- For cost-efficient bonding
- For 47.9 mm shaft diameter
- Option packaging unit: 48 pieces
| | na dotaz |
| EBS.R-FN064.S025.A15.P0056- 64 poles on an outside diameter of 56 mm
- Simple screw mounting
- For 25 mm shaft diameter
| | na dotaz |
| Helical beam coupling (D1=06 / D2=06)- Manufactured from one piece
- High torques
- Very high torsional stiffness
| | na dotaz |
| Helical beam coupling (D1=06 / D2=06)- Vyrobeno z jednoho kusu
- Vysoké krouticí momenty
- Velmi vysoká torzní tuhost
| | na dotaz |
| Helical beam coupling (D1=10 / D2=10)- Manufactured from one piece
- High torques
- Very high torsional stiffness
| | na dotaz |
| Helical beam coupling (D1=10 / D2=10)- Vyrobeno z jednoho kusu
- Vysoké krouticí momenty
- Velmi vysoká torzní tuhost
| | na dotaz |
| HI06-1H - Mounting for sensors in hygienic design Ø 6,5 mm- Material: Stainless steel V4A
- EHEDG-certified
| Montážní příslušenství
| na dotaz |
| Idler pulley (Z 119.067)- Idler pulley for cable transducers
- For angled and confined installation space
- For bridging corners and edges
| | na dotaz |
| Idler pulley (Z 119.104)- Idler pulley for cable transducers from 5 - 15 m (GCI15 / GCA15)
- Can be mounted directly on the cable transducer
- For applications with rope exit >3°
- For angled and confined installation space
| | na dotaz |
| Maintenance kit for GT7 / GTF7- Set for professional maintenance of tacho generators of the series: GT7 & GTF7
- Carbon brushes
- Connector
| | na dotaz |
| Maintenance kit for TDP0,2- Set for professional maintenance of tacho generators of the series: TDP0,2
- Carbon brushes
- Connector
| | na dotaz |
| MMFN AA01X06 - On-axis magnet for bearingless encoders- For cost-efficient adhesive mounting
- Operating temperature -40...+100 °C
- Packing unit: 10 pieces
| Magnety
| na dotaz |
| MMFS AA03X08 - On-axis magnet for bearingless encoders- For cost-efficient adhesive mounting
- Operating temperature -40...+180 °C
- Packing unit: 10 pieces
| Magnety
| na dotaz |
| Mounting kit 3x M4 x 25 DIN912, A 4.3 DIN125- Mounting kit M4 x 25 for GIM500R
| | na dotaz |
| Mounting kit 3x M4 x 50 DIN912, A 4.3 DIN125, spacers- Mounting kit M4 x 50 / Piggyback for GIM500R
| | na dotaz |
| Mounting kit EB200E- Mounting kit for bearingless encoder
- Contains spacer tape for adjusting the air gap
| | na dotaz |
| Mounting plate ø30 mm- Material: Steel
- Part of an assembly
| Montážní příslušenství
| na dotaz |
| Mounting plate ø30 mm- Material: Steel
- Part of an assembly
| Montážní příslušenství
| na dotaz |
| Mounting plate series 300 and ø12 mm- Material: Steel
- Part of an assembly
| Montážní příslušenství
| na dotaz |
| Mounting plate series 300 and ø12 mm- Material: Steel
- Part of an assembly
| Montážní příslušenství
| na dotaz |
| Mounting plate series 500 and ø18 mm- Material: Steel
- Part of an assembly
| Montážní příslušenství
| na dotaz |
| Mounting plate series 500 and ø18 mm- Material: Steel
- Part of an assembly
| Montážní příslušenství
| na dotaz |
| Mounting rod 200 mm- Material: Aluminium
- Part of an assembly
- Different lengths available
| Montážní příslušenství
| na dotaz |
| Mounting rod 200 mm- Material: Aluminium
- Part of an assembly
- Different lengths available
| Montážní příslušenství
| na dotaz |
| Mounting rod with mounting plate holder 250 mm- Material: Aluminium
- Part of an assembly
- Different lengths available
| Montážní příslušenství
| na dotaz |
| Mounting rod with mounting plate holder 250 mm- Material: Aluminium
- Part of an assembly
- Different lengths available
| Montážní příslušenství
| na dotaz |
| MSFN AA01X06 - Magnetic rotor for bearingless encoder- Simple screw mounting
- For 6 mm shaft diameter
- Operating temperature -40...+85 °C
| Magnety
| na dotaz |
| MSFS AA03X08 - Magnetic rotor for bearingless encoder- Simple screw mounting
- For 6 mm shaft diameter
- Operating temperature -40...+125 °C
| Magnety
| na dotaz |
| MZZA 01 - Adapter set for C- and T-slot sensors in standard slots- Type 1: C slot sensors in T slots
- Type 1: C slot sensors in davetail slots
- Type 3: T slot sensors in davetail slots
- Type 4: C and T slot sensors with additional fastening clamp or mounting bracket
| Montážní příslušenství
| na dotaz |
| MZZA 02 - Adapter set for T-slot sensors for special slots- Type 1 - 4: T slot sensors in special slots
- Type 5: T slot sensors with additional fastening clamp for round cylinders
| Montážní příslušenství
| na dotaz |
| MZZB 02/011 - Fastening clamp for round cylinder ø 11,3 mm- Diameter: ø 11 ... 65 mm
- Material: PA AISI 303
| Montážní příslušenství
| na dotaz |
| MZZB 02/012 - Fastening clamp for round cylinder ø 12 mm- Diameter: ø 11 ... 65 mm
- Material: PA AISI 303
| Montážní příslušenství
| na dotaz |
| MZZB 02/013 - Fastening clamp for round cylinder ø 13,3 mm- Diameter: ø 11 ... 65 mm
- Material: PA AISI 303
| Montážní příslušenství
| na dotaz |
| MZZB 02/014 - Fastening clamp for round cylinder ø 14 mm- Diameter: ø 11 ... 65 mm
- Material: PA AISI 303
| Montážní příslušenství
| na dotaz |
| MZZB 02/017 - Fastening clamp for round cylinder ø 17,3 mm- Diameter: ø 11 ... 65 mm
- Material: PA AISI 303
| Montážní příslušenství
| na dotaz |
| MZZB 02/018 - Fastening clamp for round cylinder ø 18 mm- Diameter: ø 11 ... 65 mm
- Material: PA AISI 303
| Montážní příslušenství
| na dotaz |
| MZZB 02/020 - Fastening clamp for round cylinder ø 20 mm- Diameter: ø 11 ... 65 mm
- Material: PA AISI 303
| Montážní příslušenství
| na dotaz |
| MZZB 02/021 - Fastening clamp for round cylinder ø 21,3 mm- Diameter: ø 11 ... 65 mm
- Material: PA AISI 303
| Montážní příslušenství
| na dotaz |
| MZZB 02/022 - Fastening clamp for round cylinder ø 22 mm- Diameter: ø 11 ... 65 mm
- Material: PA AISI 303
| Montážní příslušenství
| na dotaz |
| MZZB 02/024 - Fastening clamp for round cylinder ø 24 mm- Diameter: ø 11 ... 65 mm
- Material: PA AISI 303
| Montážní příslušenství
| na dotaz |
| MZZB 02/027 - Fastening clamp for round cylinder ø 27 mm- Diameter: ø 11 ... 65 mm
- Material: PA AISI 303
| Montážní příslušenství
| na dotaz |
| MZZB 02/029 - Fastening clamp for round cylinder ø 29 mm- Diameter: ø 11 ... 65 mm
- Material: PA AISI 303
| Montážní příslušenství
| na dotaz |
| MZZB 02/052 - Fastening clamp for round cylinder ø 52,4 mm- Diameter: ø 11 ... 65 mm
- Material: PA AISI 303
| Montážní příslušenství
| na dotaz |
| MZZC 01/005 - Mounting bracket for round cylinders with tie rods ø 5 ... 9 mm- Cylinder: ø 5 ... 9 mm
- Material: PA AISI 303 6005A
| Montážní příslušenství
| na dotaz |
| MZZC 01/050 - Mounting bracket for round cylinders with tie rods ø 50 ... 63 mm- Cylinder: ø 50 ... 63 mm
- Material: PA AISI 303 6005A
| Montážní příslušenství
| na dotaz |
| Power supply unit for Z-PA.SDL.1 WLAN-Adapter | | na dotaz |
| Reducer insert ø25/14.0 mm- Easy assembly by plugging in
- Exchange possible without tools
- Quick adjustment of the required diameter
- Suitable for high speeds
| | na dotaz |
| Rigid mounting plate, 1-arm (mounting kit 099)- Rigid mounting plate (1-arm, pitch circle diameter ø95 mm, mounting M6) with attachment point for Baumer torque arm size M6 (DMS 6)
- Suitable for an electrically isolated mounting.
| | na dotaz |
| Shaft coupling (D1=05 / D2=05)- Backlash-free and angularly synchronous transmission of rotary motion
- Medium torsional spring stiffness
- Small restoring forces
- Electrically isolating
- Vibration damping
| | na dotaz |
| Slit coupling (D1=06 / D2=06)- Backlash-free and angularly synchronous transmission of rotary motion
- Medium torsional spring stiffness
- Small restoring forces
- Electrically isolating
- Vibration damping
| | na dotaz |
| Slit coupling (D1=06 / D2=06)- Bezvůlový a úhlově synchronní přenos rotačních pohybů
- Střední torzní tuhost pružiny
- Malá obnovovací síla
- Elektricky izolovaný
- Tlumení vibrací
| | na dotaz |
| Slit coupling D1=10 / D2=10 (Z 121.10010XX) | | na dotaz |
| Slit coupling D1=7 / D2=10 (Z 121.07010XX) | | na dotaz |
| Snap hook (Z 119.060)- Snap hook for cable transducer with M4 thread
| | na dotaz |
| Spiral coupling (D1=05 / D2=06)Manufactured from one piece Optimum compensation of misalignment Transmission of rotation free from backlash High torsional stiffness Low restoring forces Vibration damping
| | na dotaz |
| Spiral coupling (D1=05 / D2=06) | | na dotaz |
| Spiral coupling (D1=06 / D2=06) | | na dotaz |
| Spiral coupling (D1=06 / D2=06)Manufactured from one piece Optimum compensation of misalignment Transmission of rotation free from backlash High torsional stiffness Low restoring forces Vibration damping
| | na dotaz |
| Spiral coupling (D1=10 / D2=10)- Manufactured from one piece
- Optimum compensation of misalignment
- Transmission of rotation free from backlash
- High torsional stiffness
- Low restoring forces
- Vibration damping
| | na dotaz |
| Spiral coupling (D1=10 / D2=10)- Vyrobeno z jednoho kusu
- Optimální kompenzace nesouososti
- Přenos otáčení bez vůle
- Vysoká torzní tuhost
- Nízká obnovovací síla
- Tlumení vibrací
| | na dotaz |
| Spiral coupling (D1=12 / D2=12)- Material: Stainless steel
- 12 mm shaft pin with M4 thread
| | na dotaz |
| Stator coupling, 2-armed (mounting kit 207)- For high-dynamic applications.
| | na dotaz |
| Stator coupling, 2-armed (mounting kit 207)- Pro vysoce dynamické aplikace
| | na dotaz |
| Synchro flange adaptor | | na dotaz |
| Synchro flange adaptor | | na dotaz |
| Torque arm M6 stainless, length 120...130 mm (≥71 mm) - Torque arm for hollow shaft encoder
- Swivel joints size M6 according to DIN ISO 12240-4, size series K
- Compensate for mounting tolerances of the drive shaft in an axial direction
- Stainless version
- Length 120...130 mm
- Can be shortened to ≥71 mm
| | na dotaz |
| Torque arm M6 stainless, length 425...460 mm (≥131 mm) - Torque arm for hollow shaft encoder
- Swivel joints size M6 according to DIN ISO 12240-4, size series K
- Compensate for mounting tolerances of the drive shaft in an axial direction
- Stainless version
- Length 425...460 mm
- Can be shortened to ≥131 mm
| | na dotaz |
| Torque arm M6 stainless, length 67...70 mm - Torque arm for hollow shaft encoder
- Swivel joints size M6 according to DIN ISO 12240-4, size series K
- Compensate for mounting tolerances of the drive shaft in an axial direction
- Stainless version
- Length 67...70 mm
| | na dotaz |
| Torque arm, 1-arm (mounting kit 008)- Universal mounting option by several pitch diameters.
| | na dotaz |
| Torque arm, 1-arm (mounting kit 048)- For low-dynamic applications and constant movements
| | na dotaz |
| Torque arm, 3-armed (mounting kit 007)- For high-dynamic applications.
| | na dotaz |
| ZADAP-200.ANGLE_L - Mounting bracket O200 (L design)- Material: stainless steel
- Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
| Montážní příslušenství
| na dotaz |
| ZADAP-200.ANGLE_S - Mounting bracket O200 (S design)- Material: stainless steel
- Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
| Montážní příslušenství
| na dotaz |
| ZADAP-200.SERIES10 - Mounting bracket O200 - Retrofit for sensors series 10 | Montážní příslušenství
| na dotaz |
| ZADAP-200.STRAIGHT - Mounting bracket O200- Material: stainless steel
- Content: Mounting bracket including screws/nuts for sensors with smooth and M3 threaded sleeves
| Montážní příslušenství
| na dotaz |
| ZADAP-M18.SHORT - Mounting bracket short series 18 (L design)- Material: Steel galvanized
| Montážní příslušenství
| na dotaz |
| ZADAP-M18.STANDARD - Mounting bracket series 18- Material: Steel galvanized
| Montážní příslušenství
| na dotaz |
| ZADAP-M30.LONG - Mounting bracket long series 30 (L design)- Material: Stainless steel / AISI 1.4301
| Montážní příslušenství
| na dotaz |
| ZADAP-M30.STANDARD - Mounting bracket series 30- Material: Steel galvanized
| Montážní příslušenství
| na dotaz |
| ZBLEN-200.MIXED - Slot aperture stickers series 200- Material: stainless steel
- Contents: 1 pieces
- screw mounting
- Aperture: Round Ø 0,5 mm, 1 mm, 1,5 mm, 2 mm
- Aperture: Slit 0,5 x 3 mm vertical, 0,5 x 3 mm horizontal
| Čočky / apertury / skleněné kryty
| na dotaz |
| ZBLEN-200.R_1.5MM - Slot aperture stickers series 200- Material: stainless steel
- Contents: 6 pieces (3 Sets)
- screw mounting
- Aperture: Ø 1,5 mm
| Čočky / apertury / skleněné kryty
| na dotaz |
| ZBLEN-200.R_1MM - Slot aperture stickers series 200- Material: stainless steel
- Contents: 6 pieces (3 Sets)
- screw mounting
- Aperture: Ø 1 mm
| Čočky / apertury / skleněné kryty
| na dotaz |
| ZBLEN-200.R_2MM - Slot aperture stickers series 200- Material: stainless steel
- Contents: 6 pieces (3 Sets)
- screw mounting
- Aperture: Ø 2 mm
| Čočky / apertury / skleněné kryty
| na dotaz |
| ZBLEN-200.SLIT_HOR - Slot aperture stickers series 200- Material: stainless steel
- Contents: 6 pieces (3 Sets)
- screw mounting
- Aperture: 0,5 mm x 3 mm horizontal
| Čočky / apertury / skleněné kryty
| na dotaz |
| ZBLEN-200.SLIT_VER - Slot aperture stickers series 200- Material: stainless steel
- Contents: 6 pieces (3 Sets)
- screw mounting
- Aperture: 0,5 mm x 3 mm vertical
| Čočky / apertury / skleněné kryty
| na dotaz |
| ZPA4.001 | | na dotaz |
| ZPA4.002 | | na dotaz |
| ZPART-M18.NUT - Clamping nut for sensors Ø 18 mm- Material: Plastic (ABS TERLURAN)
- For re-orders when lost
| Montážní příslušenství
| na dotaz |
| ZPH1-9B13- ISO 2852 (Tri-Clamp), DN 33.7; 38, Ø 50.5
- DIN 32676-A (Tri-Clamp), DN 32; 40, Ø 50.5
- DIN 32676-A (Tri-Clamp), DN 40, Ø 50.5
- DIN 32676-B (Tri-Clamp), DN33.7, Ø 50.5
- DIN 32676-C (Tri-Clamp), DN 1 1/2", Ø 50.5
- SO 2852 (Tri-Clamp), DN 38, Ø 50.5
- PEEK natural without glass fiber
- 20 bar
- EHEDG
- 3-A
| | na dotaz |