![]() | HEAG 150- Signal level shifting from HTL → TTL or TTL → HTL
- Isolating signal cables to multiple receivers to avoid earth loops
- Regenerating of signals when transmitting over long distance
- 1 input unit and 3 output units
| na dotaz |
![]() | HEAG 151, 152, 153, 154- Změna výstupního signálu TTL → HTL nebo HTL → TTL
- Izolování signálových kabelů k více přijímačům, aby se zabránilo zemním smyčkám
- Regenerace signálů při přenosu na velkou vzdálenost
| na dotaz |
![]() | HEAG 158- Converting of SinCos signals into TTL and HTL signals
- Additional interpolation of the signals (multiplying or dividing)
- Oversampling with 24 MHz
- Digitally pre-filter
- Very high output frequency possible
| na dotaz |
![]() | HEAG 159- Converting of SinCos signals into multiplied SinCos signals
- Multiplying factor 1...128
- Offset and amplitude adjustment
- Oversampling with 24 MHz
- Digitally pre-filter
- High signal quality
| na dotaz |
![]() | HEAG 160- Converting of SinCos signals into multiplied SinCos signals
- Additional interpolation of HTL or TTL signals (multiplying or dividing)
- Oversampling with 24 MHz
- Digitally pre-filter
- Very high output frequency possible
| na dotaz |
![]() | HEAG 171, HEAG 172- Pro místa s vysokou mírou rušení
- Převod standardních čtvercových signálů na optické signály
- Každý kanál je připojen k optickému vláknu se snadnou montáží.
- K dispozici jsou tři různé verze zástrček
- Doba zpoždění na 100 m délky optického vlákna je 1 µs.
- Kromě POF jsou použitelné všechny optické kabely, např. PCF 200 μm, křemenná vlákna 50 a 62,5 μm.
| na dotaz |
![]() | HEAG 173, HEAG 174- Pro místa s vysokou mírou rušení
- Každý kanál je připojen k optickému vláknu se snadnou montáží.
- Přepočet optických signálů na elektrické v ovládací skříni přijímače
- K dispozici jsou tři různé verze zástrček
- Doba zpoždění na 100 m délky optického vlákna je 1 µs.
- Kromě POF jsou použitelné všechny optické kabely, např. PCF 200 μm, křemenná vlákna 50 a 62,5 μm.
| na dotaz |
![]() | HEAG 175, HEAG 176- Pro místa s vysokou mírou rušení
- Převod standardních čtvercových signálů na optické signály
- Každý kanál je připojen k optickému vláknu se snadnou montáží.
- K dispozici jsou tři různé verze zástrček
- Doba zpoždění na 100 m délky optického vlákna je 1 µs.
- Kromě POF jsou použitelné všechny optické kabely, např. PCF 200 μm, křemenná vlákna 50 a 62,5 μm.
| na dotaz |
![]() | HEAG171 R ST 65 LWL-Transmitter- For high interference locations
- Converting standard square-wave signals into fiber-optic signals
- Each channel is coupled onto fiber-optic easy-to-fit plug
- 3 different plug versions available
- Delay time over a 100 m length of fiber-optic is 1 µs
- Except of POF all fiber optic cable usable, e. g. PCF 200 μm, silica fiber 50 and 62.5 μm
| na dotaz |
![]() | HEAG171 R ST 65 LWL-Transmitter- For high interference locations
- Converting standard square-wave signals into fiber-optic signals
- Each channel is coupled onto fiber-optic easy-to-fit plug
- 3 different plug versions available
- Delay time over a 100 m length of fiber-optic is 1 µs
- Except of POF all fiber optic cable usable, e. g. PCF 200 μm, silica fiber 50 and 62.5 μm
| na dotaz |
![]() | HEAG172 ST 65 LWL-Transmitter- For high interference locations
- Converting standard square-wave signals into fiber-optic signals
- Each channel is coupled onto fiber-optic easy-to-fit plug
- 3 different plug versions available
- Delay time over a 100 m length of fiber-optic is 1 µs
- Except of POF all fiber optic cable usable, e. g. PCF 200 μm, silica fiber 50 and 62.5 μm
| na dotaz |
![]() | HEAG172 ST 65 LWL-Transmitter- For high interference locations
- Converting standard square-wave signals into fiber-optic signals
- Each channel is coupled onto fiber-optic easy-to-fit plug
- 3 different plug versions available
- Delay time over a 100 m length of fiber-optic is 1 µs
- Except of POF all fiber optic cable usable, e. g. PCF 200 μm, silica fiber 50 and 62.5 μm
| na dotaz |
![]() | HEAG173 ST- For high interference locations
- Each channel is coupled onto fiber-optic easy-to-fit plug
- Reconversion of optical to electrical signals in the receiver control cabinet
- 3 different plug versions available
- Delay time over a 100 m length of fiber-optic is 1 µs
- Except of POF all fiber optic cable usable, e. g. PCF 200 μm, silica fiber 50 and 62.5 μm
| na dotaz |
![]() | HEAG173 ST- For high interference locations
- Each channel is coupled onto fiber-optic easy-to-fit plug
- Reconversion of optical to electrical signals in the receiver control cabinet
- 3 different plug versions available
- Delay time over a 100 m length of fiber-optic is 1 µs
- Except of POF all fiber optic cable usable, e. g. PCF 200 μm, silica fiber 50 and 62.5 μm
| na dotaz |
![]() | HEAG174 ST- For high interference locations
- Each channel is coupled onto fiber-optic easy-to-fit plug
- Reconversion of optical to electrical signals in the receiver control cabinet
- 3 different plug versions available
- Delay time over a 100 m length of fiber-optic is 1 µs
- Except of POF all fiber optic cable usable, e. g. PCF 200 μm, silica fiber 50 and 62.5 μm
| na dotaz |
![]() | HEAG174 ST- For high interference locations
- Each channel is coupled onto fiber-optic easy-to-fit plug
- Reconversion of optical to electrical signals in the receiver control cabinet
- 3 different plug versions available
- Delay time over a 100 m length of fiber-optic is 1 µs
- Except of POF all fiber optic cable usable, e. g. PCF 200 μm, silica fiber 50 and 62.5 μm
| na dotaz |
![]() | HEAG176 ST 20 LWL-Transmitter- For high interference locations
- Converting standard square-wave signals into fiber-optic signals
- Each channel is coupled onto fiber-optic easy-to-fit plug
- 3 different plug versions available
- Delay time over a 100 m length of fiber-optic is 1 µs
- Except of POF all fiber optic cable usable, e. g. PCF 200 μm, silica fiber 50 and 62.5 μm
| na dotaz |
![]() | HEAG176 ST 20 LWL-Transmitter- For high interference locations
- Converting standard square-wave signals into fiber-optic signals
- Each channel is coupled onto fiber-optic easy-to-fit plug
- 3 different plug versions available
- Delay time over a 100 m length of fiber-optic is 1 µs
- Except of POF all fiber optic cable usable, e. g. PCF 200 μm, silica fiber 50 and 62.5 μm
| na dotaz |
![]() | LWL-EHR HTL- Transmission length up to 1500 m
- Reconversion of optical signals into electrical signals and generation of status signals
- Transmission error detection via checksum (CRC)
- High-precision transmission of signals (Jitter
| na dotaz |
![]() | LWL-EHR TTL- Transmission length up to 1500 m
- Reconversion of optical signals into electrical signals and generation of status signals
- Transmission error detection via checksum (CRC)
- High-precision transmission of signals (Jitter
| na dotaz |
![]() | LWL-EHR TTL- Transmission length up to 1500 m
- Reconversion of optical signals into electrical signals and generation of status signals
- Transmission error detection via checksum (CRC)
- High-precision transmission of signals (Jitter
| na dotaz |
![]() | LWL-SBR- Transmission length up to 1500 m
- Converting standard square-wave signals into optical signals
- Transmission error detection via checksum (CRC)
- High-precision transmission of signals (Jitter
| na dotaz |
![]() | LWL-SHR- Transmission length up to 1500 m
- Converting standard square-wave signals into optical signals
- Transmission error detection via checksum (CRC)
- High-precision transmission of signals (Jitter
| na dotaz |
